A student from petroleum technology department at the University of Technology Marwa Zhahir Abdul Kadhim, earned a graduate a master's degree with honors from the mission tagged "Ngeijer permeability as a result of water injection into the formation Zubair / West Qurna field" in the Graduate Hall on Thursday, 02/03/2017
The objective of this research to study the permeability damage as a result of the injection of water without treatment in the formation of - Zubair, West Qurna field. Ten sandy models are equipped with the configuration of the West Qurna field at depths of "3266-3218" by the Southern Oil Company.
Porosity and permeability results executed by gas before the water injection devices appear at the top of the liquid devices and Al-giosbk values as a result of the possibility of sliding the gas for that reason, the gas results were corrected to get rid of the influence of slipping through the use of correction klinkenberg.
Water injection has been outfitted from a layer of Dammam by SoC analysis has been done in the laboratories of two rivers Omar Basra water with very high salinity.
Water injection has been held in the laboratory of reservoir / petroleum technology Department using pure water, various salts and other minerals that resembles water injection for the purpose of reducing the vulnerability reduce permeability resulting from water injection.
The discussion Committee consisted of dr.Smira Mohammad Hamdallah from Baghdad University as a president , dr. Ahmed Askar Najaf from al-Karkh University and L. Hussein Ali Baqer from Baghdad University as a members dr.mohamed Jawad Saleh the director of petroleum technology department a head of the oldest expert , Dr. Abdullah Abdul Hassan Ali from the Ministry of Oil as a supervisors and the expert, Dr. Abdel-Aal Abdel Hussein Aldbaj ingredient scientifically and dr. Najim Abdul-Kadhim Jawad denominated linguistically, all are from the University of Technology.

Student Samar Karim Ibrahim earned a master's degree from the Department of Laser Optical Electronics Engineering in the University of Technology the letter tagged: (based variable spectral filter using fiber Barak incised).
The Committee comprised discussion of Prof. Dr. Ali Yusuf Fattah, of the University of Technology as a president ,L. Shatha Mazhar Hassan of the Iraqi Commission for Computers and Prof. Dr. Jassim Kadhem Hamoud members ,Prof. Dr. Iyad Muhammad Zwain ,L. Abdullah Khudair Abbas supervisors ,all are from the University of technology.
And reached the researcher to study and analyze the performance of fiber Barak incised as a variable spectral filter using two different techniques are tensile techniques / compression and technique of temperature (heating) after it has been verified from the results of the theoretical analysis of both technologies and approved scientifically there are two vision packages have been verified their two traditional package (package C ) and long-package (package L) so as to cover the gain bandwidth pumps optical fiber hybrid between pumps arebeom vestiges pumps Raman

Under the auspices of the President of the University of Technology Prof. Dr. Amin Douai Thamer a Department of Media and Public Relations at the University in collaboration with the Department of Relations and Information at the Ministry of Higher Education and Scientific Research held Workshop entitled Government Communications for a period of 7-8 / 3/2017 on the conference room at the Department of Control and Systems Engineering.
The President of the University delivered a speech in which he said that the media played a major role in the success of any institution of the state, and the Media of the university will not success, but the existence of the link members of the all sections for the transfer of these activities and achievements that occur within their organizations to determine the reservoir error and points positive within the organization.
He added that the victories achieved by the army and the crowd against Daesh is pride to us and should the media in universities focus on it through the fightness Aldaeshy thoughts calling for workers in the Department of Media and Public Relations effective contribution to the success of the march of the University of Technology in the media.
Both of them, Dr. Mustafa Hamed and L. Ali Hadi Hassan from the media of the Ministry of Higher Education and Scientific Research, a lecture on the Government Communication and activation in government institutions which included the workshop definition of government contact, which is a new form developed by the General Secretariat of the Council of Ministers in 2014, which will coordinate with government institutions on the one hand the process and with the General Secretariat the Council of Ministers on the other hand to get certified information before it is presented to the official Supreme, and what are the important steps in the development of departments of government communication, which includes awareness of the new role and strategy for government communications and the dissemination of this awareness among government liaison officers and officials in various ways as well as an assessment of relevant professionally and objectively to measure the ability of the administration to apply the Principles of government communication and then apply a comprehensive and continuous training plan a third step, and finally the right hiring workers in the principles of the right staff in the right place.

A committee of the Iraqi national classification problem for universities in the University of Technology, headed by Prof. Dr. Nabil Abdul Majid al-Bayati Jadou from the Department of Building and Construction Engineering at the University of Central assessment of the Technical University of university performance.
The Committee held its first meeting at the Department of building and structure Engineering, where the head of the Commission Prof. Nabil Abdul Majid lecture in which the definition of the Presidency of the Central Technical University and explain all departments and disciplines of colleges and institutes of the university with the definition of sites and images from those colleges and institutes with the help of Google Maps site accept it. With an explanation of the Commission's work mechanism in the way of performance evaluation and through cooperation with the quality and performance of university at the University of Technology, headed by Dr. Mustafa Kamel.
The Committee also held its second meeting in the Presidency of the Central Technical University Hall on Thursday, 02.09.2017 in the presence of President of the University Prof. Dr. Majid Hamid Majeed and Assistant Rector for Academic Affairs Prof. Dr. Fareed Majeed Abid and deans and directors of institutes and departments at the university and for the purpose of discussing standards required in the classification of universities as well as to explain the forms required to install information and documented.
It had been provided a detailed and objective view of the pre-chairman of the national classification and evaluation of Central Technical University Prof. Dr. Nabil al-Bayati, fistful introduce of the names of the members of the expatriate Committee of the University of Technology of the activity which is being implemented for the first time at the level of Iraqi universities, as was all the work of measures to clarify and document the data and information required for the Commission's work.
Chairman of the Committee and answered all inquiries and questions which raised during the meeting. As expressed rector appreciation and admiration and gratitude and praise for this demonstration of the course of action the Commission Assistant scientific and expressed the willingness and cooperation of Central Technical University in creating all of the necessary supplies to get the job done in the best picture and according to the procedures requested by the Committee for National classification and evaluation of university performance coming from the University of Technology Plan
It is noted that the committee formed by the University of Technology of membership Dr. Abdul-Kadhim Mohammed and dr. Hussein Waheeb from Mechanical Engineering dr. Najim Abdul-Kadhim and dr. Ramzi Sehud of petroleum engineering and dr. Sacrificed Saadi Ahmed of Applied Science and dr. Ahmed Abdel Samie and L. Firas hilarious production and metallurgical engineering and dr. Ahmed Sabah Abdul Ameer of Control and Systems Engineering and dr. Easa Saleh arrows of materials and engineering dr. Hameed Ahmed Hashim of Architecture and Engineering dr. Abdaljabbaraoad of Electromechanical Engineering and scheduled L.Faisal Khalid Sultan of Electromechanical Engineering.
It consists of Central Technical University of five colleges and 11 Institute and a total of 110 department competencies different technology (medical, health, engineering, technology, administrative, economic, financial, statistical, technical, training, ...) They are distributed in the provinces of Baghdad, Diyala and Wasit

Department of Control and Systems Engineering at the University of Technology master's degree cum laude majoring in engineering control of the student expected Mohammed Saleh for his tagged entitled
(Adaptive Sliding Mode Control Design with Application to Mechanical Systems)
(Controlled sliding adaptive design with the application on the mechanical systems)
Discussion Committee comprised of Prof. Dr. Laith Jassim Al Saud, chairman ,Prof. Dr. Omar Farooq Lutfi and Prof. Dr. Osama Awad Ali and members Prof. Dr. Shibley Ahmed Humaid supervisor.
The researcher designed a controlled slide adapted to control discreet mechanical systems. Adaptive dominant slider (ASMC) has many advantages in addition to the advantages of the traditional dominant slider.
First: control effort is reduced to a minimum and that define the verification slip conditions.
Second: It is not required to be the upper boundary of the doubts already well known. Moreover, the concept of the dominant equivalent and the method of boundary layer can be used to promote reduce concussions in the control effort. So you can apply the proposed method (ASMC) effectively.